How to Fix “Invalid Configuration Information — Please Run Setup Program” on Dell PCs 2025

 How to Fix “Invalid Configuration Information — Please Run Setup Program” on Dell PCs 2025

Cause

This event is the result of resetting the BIOS to defaults. This event results from inadvertently holding down the power button for at least 25 seconds. It can also trigger when the computer is placed in a bag or a position where the power button may be engaged for a long period.

If the computer is imaged with the BIOS set in Legacy Mode, this BIOS reset places the computer in a no boot configuration as the default BIOS setting is UEFI. If operating in Legacy mode, press F2 to enter the BIOS and change the boot order back to legacy, then reboot the computer. Press the F1 key to boot the computer (due to the time and date not being set) then Windows should update the time and date automatically.

If BitLocker is enabled on the computer, the Trusted Platform Module (TPM) is reset causing BitLocker to prompt for the recovery key.

Resolution

Video on youtube:https://youtu.be/KmsIg51wDN0

When this issue occurs, follow the guide instructions on the screen. Press the F2 Key (if attached to a keyboard) or the Volume Down button to enter the BIOS menu.

Once in the BIOS, reset the custom BIOS options (if any). Verify that the date and time are correct, and change any other needed BIOS menu options for your normal configuration and then restart the computer.